top of page

GRID PROTECTION

Reliability in any challenging weather conditions

The most reliable and safe fused cutout

          Sometimes, the smaller devices can cause major trouble on electrical networks. That is why CO7 Technologies takes reliability, safety and quality very seriously. Over the past 30 years, the V-Rupt fused cutout has been deployed under the most demanding conditions. With its safe and unbreakable design that resists damage from wide temperature variations and freeze/thaw cycles, the V-Rupt delivers outstanding performance in all extreme conditions

IMG_0096.jpeg
8cc28fa258f3489db0e5a2c647ecae97 [Recovered].png

Proven Realiability

          This rugged design features show the highest reliability levels endorsed by extensive field use records. The V-Rupt parts are made of brass, silver-plated copper and tin-plated. The materials are chosen with particularly attention to galvanic corrosion.

  • The fuse holder is made with fiber-glass filament wound tubing resistant to UV rays and harsh weather. It is interchangeable and easily traceable due to the specific identification on the stick;

  • The fuse holder is equipped with expendable cap with rupture capacity of 8,275 kPa

(1,200lb/po2);

  • The cable terminals are sized for cables with diameter between 5 and 21 mm;

  • The insulator is especially made for the application following very strict specifications to ensure reliability and durability in a wide range of temperature and within harsh environment. Each insulator is identified for easy traceability;

  • Reverse current loop contacts at both line and hinge ends increase contact pressure during high surges preventing pitting and burning;

  • Positive lever operated latch prevents accidental opening;

  • High quality cast bronze construction. Stainless steel utilized in selected pins and springs;

  • Animal proofing;

  • Silver-plated, spring-loaded copper contacts;

Securupt-small-removebg-preview_edited_e

Linkbreak Attachment

 

The Linkbreak mecanism is designed so that it will break element of fuse links rated from 1/3 through 100 A with a minimum of effort. Fuseholder extinguishes load current as if fuse element had melted due to an overload condition.

  • Low initial cost compared to cutouts with integral loadbreak devices;

  • No complicated interrupter device to possibly fail;

  • Can be hookstick operated from ground with standard or extend stick. It is not necessary to climb the pole as it is for portable loadbreak tool in the event bucket truck is not available or location is such that it cannot be reached by bucket truck.

Linkbreak.png

CONTACT US

What can we do for you today?

Whether you need information about our solutions, a project requiring specialist support or any other requests, do not hesitate to contact us. We will get back to you very soon.

Thanks for submitting!

Inverse.png

2525 Rue Louis-A-Amos

Montreal - Quebec

H8T 1C3 - Canada

4035 Rue Letellier

Sherbrooke - Quebec

J1L 1Z3 - Canada

call.png
Linkedin white.png
bottom of page